Production and Physicochemical Characterization of Analog Rice Obtained from Sago Flour, Mung Bean Flour, and Corn Flour Using Hot Extrusion Technology.

Extrusion technology allows the preparation of analog rice, an artificial product made of carbohydrate sources other than rice, with characteristics similar to natural rice. In this study, we aimed at determining the effect of composition and temperature on the nutritional content of analog rice obtained using heat extrusion technology. The physical properties and acceptability of the resulting product were also studied. Skim milk, sago, mung bean, and corn flour as well as the binder carboxymethyl cellulose (CMC) were used. The procedure was conducted in four stages: raw-material preparation, formulation, physicochemical evaluation, and sensory property evaluation. The best analog rice formula was established as 50% sago flour, 30% corn flour, 19.2% mung bean flour, 0.4% skim milk, and 0.4% CMC. The panelists' most preferred rice analog formula was the one with the highest sago starch and skim milk content. The extrusion temperature did not significantly affect the nutrient content. However, it had a considerable impact on the thermal profile and physical properties, such as appearance and granular morphology.

Influence of composite flour constituents and extrusion temperature in the production of analog rice.

This study was conducted to determine the effect of composite flour (CF) constituents and different extrusion temperatures on the production of analog rice and community perceptions about the produced rice. CF was produced by mixing modified cassava flour (Mocaf) and snakehead fish flour (SF) in the following ratios: 100:0; 97:3; 94:6; 91:9; and 88:12. Analog rice was then extruded from CF at the following temperatures: 50, 70, and 90°C. The analog rice was tested for physical properties (bulk density and cooking time), chemical properties (nutrient content), and organoleptic properties. The results showed that CF and extrusion temperature affect the nutrient content of analog rice. The best analog rice formulation constituted of CF with Mocaf:SF ratio of 91:9 and extrusion temperature of 70°C, and contained 14.34% water, 0.85% ash, 71.83% carbohydrate, 11.24% protein, 1.12%, calcium 1,113 ppm, and 2.43% dietary fiber. This study included 42 respondents aged 20-23 years, including 20 males and 22 females. All the respondents showed acceptance for the analog rice, suggesting that it could substitute ordinary rice as a staple food.

Physicochemical Properties of Sago Ozone Oxidation: The Effect of Reaction Time, Acidity, and Concentration of Starch.

The disadvantageous properties of sago starch has limited its application in food and industrial processes. The properties of sago starch can be improved by changing its physicochemical and rheological characteristics. This study examined the influence of reaction time, acidity, and starch concentration on the oxidation of sago starch with ozone, a strong oxidant. Swelling, solubility, carbonyl, carboxyl, granule morphology, thermal profile, and functional groups are comprehensively observed parameters. With starch concentrations of 10-30% (v/w) and more prolonged oxidation, sago starch was most soluble at pH 10. The swelling power decreased with a longer reaction time, reaching the lowest pH 10. In contrast, the carbonyl and carboxyl content exhibited the same pattern as solubility. A more alkaline environment tended to create modified starch with more favorable properties. Over time, oxidation shows more significant characteristics, indicating a superb product of this reaction. At the starch concentration of 20%, modified sago starch with the most favorable properties was created. When compared to modified starch, native starch is generally shaped in a more oval and irregular manner. Additionally, native starch and modified starch had similar spectral patterns and identical X-ray diffraction patterns. Meanwhile, oxidized starch had different gelatinization and retrogradation temperatures to those of the native starch.

Enzymatic purification of glucomannan from Amorphophallus oncophyllus using α-Amylase / Purificação enzimática de glucomanan de amorphophallus oncophyllus usando α -amilasas

The international standards for top glucomannan flour require a minimum of 70% glucomannan. The glucomannan content of Amorphophallus oncophyllus flour was approximately 60%, with starch as the major impurity. Elimination of starch was expected to increase the purity of glucomannan. The purpose of this research was to study starch hydrolysis of the flour using α-amylase. Temperature (35.5-84.5oC), time (0.4-3.6 h) and pH (2.2-8.8) of hydrolysis were selected as independent variables. A central composite design of response surface methodology (RSM) was performed to obtain the optimum condition. This approach was a novelty of this enzymatic purification of A. oncophyllus. Glucomannan content, starch content, and solubility were chosen as the response variables. The models were reliable for predicting the responses (R2≥ 0.771). It was predicted that the highest glucomannan content (93.0%) obtained at the lowest starch content (1.14%), which hydrolysed at pH 6.17, 84.5oC and 3.6 h. Prior the verification of the optimum hydrolysed condition from the model, the glucomannan and starch content was 81.59% and 2.27%, respectively. After purification, the absorbance of the ß-1,4 glycosidic bond increased as a sign of higher glucomannan purity. A less rough surface and irregular shape of the grain morphology was observed after purification.

Os padrões internacionais para a farinha de alta calidade de glucomanan requerem um mínimo de 70% de glucomanan. O conteúdo de glucomanano da farinha de Amorphophallus oncophyllus foi de aproximadamente 60%, com o amido como a maior impureza. Esperava-se que a eliminação do amido aumentasse a pureza do glucomanan. O objetivo desta pesquisa foi estudar a hidrólise do amido da farinha usando α-amilase. A temperature (35,5-84,5oC), o tempo (0,4-3,6 h) e o pH (2,2-8,8) da hidrólise foram selecionados como variáveis independentes. Um desenho central composto pertencente á metodologia da superfície de resposta (MSR) foi realizado para obter a condição ótima. Esta abordagem foi uma novidade desta purificação enzimática de A. oncophyllus. O conteúdo de glucomanan, conteúdo de amido e solubilidade foram escolhidos como as respostas. Os modelos foram confiáveis para predizer as respostas (R2≥ 0,771). Os modelos indicaram que o maior conteúdo de glucomanan (93,0%) foram obtidos no menor conteúdo de amido (1,14%),que hidrolisou a um pH 6,17, 84,5ºC e 3,6 h. Antes da verificação da condição hidrolisada ótima do modelo, o conteúdo de glucomanan e amido foi de 81,59% e 2,27%, respectivamente. Após a purificação, a absorbância da ligação ß-1,4 glicosídica aumentou com um sinal de maior pureza de glucomanan. Uma superfície mais lisa e forma irregular da morfologia do grão foi observada após a purificação.